Hardware knowledge: hardware ware installation tips

Installation tips
1. Handle installation: Handle installation should be ergonomic and convenient to use. All handles for the same wardrobe must be neat and tidy during installation. The length of all screws should match the thickness of the cabinet door and the drawer surface. When drilling with a drill, the hole size should be the same as the diameter of the screw.

2, the installation of the door hinge: the general door is installed with two hinges of length 100mm, if it is a solid door or concave and convex shape door must use three hinges, or install two hinges of length 125mm.

3, the installation of the lock: after the door lock is installed, the handle should be between 900-1000mm. Install the lock body and the lock tongue first, so that the lock tongue plate is flush with the door edge, close the door, fix the position of the lock plate, and then install the lock plate, and ensure that the lock plate is flush with the edge of the door cover.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn