Hardware installation knowledge how to install bathroom hardware

The renovation of the bathroom without Hardware has undergone some perfect functions. After the stage of pursuing beauty, it is entering a new stage of meeting the functional requirements and considering energy saving and water saving. Have a certain understanding of the bathroom hardware installation knowledge, can be supervised when the workers work, to prevent mistakes.

Bathroom hardware installation sequence

Inlay wall tiles - suspended ceiling - laying floor tiles - installation of toilets, washbasins , tubs - installation of connection drains - installation of lamps, sockets, mirrors - installation of towel rods and other hardware accessories.

1, the installation order of the toilet

Check the floor drain pipe - align the nozzle - level the alignment - draw the mark - punch the hole - put on the putty - put on the rubber pad - screw the nut - the two sides of the water tank on the back of the hole mark - punch - insert Bolt - 捻 - - Back tank hoist flat - Screw on the nut - Install the back tank water elbow - Install the splayed door - Insert the float door and the splayed door - Tighten the nut.

2, the installation order of the washbasin

Expansion bolts are inserted - 捻 - the tube rack is hung - put the washbasin on the rack to find the level - the water connection: the washbasin - straighten - the water connection.

3, the installation order of the tub

Installation of the water - the ash is tightly closed - the installation of the water - flattening.

Bathroom hardware installation skills

1. Handle installation: Handle installation should be ergonomic and convenient to use. All handles for the same wardrobe must be neat and tidy during installation. The length of all screws should match the thickness of the cabinet door and the drawer surface. When drilling with a drill, the hole size should be the same as the diameter of the screw.

2, the installation of the door hinge: the general door is installed with two hinges of length 100mm, if it is a solid door or concave and convex shape door must use three hinges, or install two hinges of length 125mm.

3, the installation of the lock: after the door lock is installed, the handle should be between 900-1000mm. Install the lock body and the lock tongue first, so that the lock tongue plate is flush with the door edge, close the door, fix the position of the lock plate, and then install the lock plate, and ensure that the lock plate is flush with the edge of the door cover.

Concerned about surprises

Label: bathroom hardware installation

Previous: How to maintain the door and window hardware when decorating small knowledge Next: The sliding rail of the wardrobe hardware must not look at common sense